LUXACURY LED Desk Lamp with Wireless Qi Charger Station for Airpods/Iwatch/iPhone X / 8/8 Plus Fast Charge for Galaxy S8 / S8+/ S7 /S7 Edge/ S6 All Qi-Enabled Devices,3 Brightness Levels

Wireless Charger With Light Dimmable Table Lamp, LED Desk Lamp with Wireless Charger Stand for Iphoe / Galaxy ect.
supports iWatch 4 generation watchOS5.0 or below 5.2.1 version

Specification
[Applicable mobile phone] IPhone8/IPhone8P/IPhoneX, Samsung S6/S7/S8, etc., compatible with QI equipment 100% brand smart phone
[product material] base ABS + aluminum alloy lampshade
[Scheme] ST chip
[Input Interface] Type-C Output Interface: Micro USB
[Input Power] QC3.0 or PD
[Input voltage] DC4.3V~5.5V/1.5~2A, beyond this range voltage alarm and stop charging
[output voltage] 5V ± 0.1V
[Output power] up to 10W
7.5W for Iphone Max,
10W for Android phone Max,
5W for Iwatch Max,
2W for Airpods Max,
5W for Desk lamp Max
[conversion efficiency] is greater than 73%
[Transmission distance] up to 10mm, recommended transmission and reception spacing 2mm~4mm
[Light source] SMD2835*26PCS (three-level dimming, 26 lamp beads)
[Switch] touch switch + three-tone light (warm light eye protection)
[illuminance] 1000+10% Lux (effective test distance 38CM)
[Luminous flux] 360+10% Lm

INSTRUCTION:
1.Connect the QC3.0 or PD adapter charging head and the 4-in-1 Apple Matte with the USB charging cable .Plug the charging head into the power.
2.Place the device you need to charge onto the Mate .
3.In case of too low ,too high charging voltage ,high temperature or excessive current,the charger will stop charging.Please go back to step 2.

NOTE:
1.Check carefully whether the charging adapter
specification,quality and output current is suitable before use.If not ,it may cause no charging or low current,which may damage the charging head.
2.This device has a large input current.Please use the original charging cable for this device,which supports 3-4 A. Otherwise,it will cause no charging.